A-PC GamePad

A-PC GamePad

Play PC games wirelessly with your Android gamepad! One app on your Android connects to another app on your PC, so you can play PC games with Android gamepads, or the touchscreen gamepad.

With Nvidia Shield, or another android device, this takes over the controls on the gamepad, and sends them to your PC.

It runs in the background so you can use any other app while you control your PC. Apps like Splashtop Streamer , Remote Desktop, Limelight, Nvidia GameStream, Remotr, or VNC can stream your PC screen to your android device, allowing you to play your PC from anywhere in the world!

You can even use your Nvidia Shield Controller, or other Android gamepad wirelessly with your PC! Now there is vibration (force feedback) on devices that vibrate. (Controller will not vibrate, only the device if it has vibration).

Supports multiple controllers! Play games with your friends.

This will take a little work to setup, but is easy to run after that. You can refer to the help website here -

Requirements:

Android device running OS 4.4 KitKat

Android gamepad (Nvidia Shield Portable) supported

Windows PC that plays games

Install vJoy v2.1.6 on PC

Install .NET 4.0 on PC

Local wifi network

How to install:

Install & Configure vJoy on our PC:

1. Download vJoy v2.1.6 - http://sourceforge.net/projects/vjoystick/files/Beta%202.x/2.1.6.6-220116/vJoySetup.exe/download

2. Run the downloaded file and follow instructions to install. One screen will ask to install companion applications, make sure to install vJoy Configuration.

3. After installing, run the vJoy configuration app. Use the vJoyConfigSetting.png in the A-PC folder to show settings or follow the next steps.

4. Check Axes : X, Y, Z, Rx, Ry, R/R/Rz/Rudder

5. POV Hat Switch : Continuous, POVs: 1

6. Number of Buttons : 10

7. Action: Configure

8. Target Device : 1

9. Click Apply - this will setup a vJoy virtual joystick on device slot 1.

Setup multiple controllers: (if you want them)

10. Change the target device to 2. Click Apply to add a 2nd controller. Repeat with 3, 4, etc.

11. Click OK to finish.

Start the Server on the PC:

1. Download the server from the website. Extract the folder.

https://sites.google.com/site/silentdesignsandroid/a-pc-gamepad

2. On your PC, run the application in the folder called APCGamePadServer_vX.X(.exe).

Install & Configure the Android client app:

1. Open the application

2. On the Android device go to settings -> language & input -> Scroll down and find A-PC GamePad, if it is not checked, check it.

3. Then hit the settings button on the right to open the settings app.

4. Click on Server Address to set the IP address to your PC's local IP address (ex. 192.168.1.100).

5. Click on Switch Input Method, make sure APCGamePad is selected.

6. Click on Connect to Server!

If you want to see if it is working, run joy.cpl. Click on one of the vJoy Devices, usually the top one. Then click Properties, you should see the device move when you move the gamepad.

Notes for Nvidia Shield Portable:

For console mode you can use a 2nd controller as Controller#1 by turning off Controller 1 in the app. This will move all controllers down 1 (i.e controller 2 will become controller 1, 3 will become 2 etc.)

Select is mapped to the volume key. Any other controller, select will be select or back.

It may be necessary to open UDP port 4444 on your router if you are accessing your PC away from a local (home) network.

Windows firewall may block the connection so adding an exception should allow the apps to connect.

A-PC游戏手柄

玩电脑游戏无线与Android游戏手柄！在Android应用程序的一个连接到你的电脑上的另一个应用程序，这样可以起到与Android游戏手柄或触摸屏手柄的PC游戏。

与NVIDIA盾或其他Android设备，这需要在控制上的手柄，并将它们发送到您的PC。

它在后台运行，这样你就可以在你控制你的PC使用任何其他应用程序。像Splashtop的流光，远程桌面，出风头，Nvidia的GameStream，Remotr，或VNC应用程序可以串流你的电脑屏幕到您的Andr​​oid设备，让您在世界的任何地方播放您的电脑！

你甚至可以使用您的NVIDIA SHIELD控制器，或与您的PC其他Android游戏手柄无线！现在有上振动设备振动（力反馈）。 （控制器将不振动，仅设备，如果它有振动）。

支持多个控制器！播放与您的朋友的游戏。

这将需要一些工作来设置，但易后运行。你可以参考帮助网站在这里 -

要求：

Android设备运行OS 4.4奇巧

支持的Andr​​oid游戏手柄（NVIDIA SHIELD便携式）

Windows PC上的玩游戏

安装在PC vJoy v2.1.6

安装在PC .NET 4.0

当地的WIFI网络

如何安装：

我们的PC上安装和配置vJoy：

1.下载vJoy v2.1.6 - http://sourceforge.net/projects/vjoystick/files/Beta%202.x/2.1.6.6-220116/vJoySetup.exe/download

2.运行下载的文件，然后按照安装说明。一个屏幕会提示安装配套应用程序，请确保安装vJoy配置。

3.安装完成后，运行vJoy配置应用程序。使用vJoyConfigSetting.png在A-PC的文件夹，显示设置，或按照下面的步骤。

4.检查轴：X，Y，Z，RX，RY，R / R /的Rz /舵

5. POV帽开关：连续，POVs：1

6.数字按钮：10

7.行动：配置

8.目标设备：1

9.单击Apply - 这将安装在设备插槽1 vJoy虚拟摇杆。

设置多个控制器（如果你想让他们）

10.更改目标设备2.单击应用添加第二个控制器。 3，4等重复

11.单击确定完成。

在PC上启动服务器：

1.从网站下载服务器。解压的文件夹。

https://sites.google.com/site/silentdesignsandroid/a-pc-gamepad

2.在您的PC上，运行名为APCGamePadServer_vX.X文件（.exe）文件夹中的应用程序。

安装和配置Android客户端应用程序：

1.打开应用程序

2.在Android设备进入设置 - >语言和输入 - >然后找到A-PC游戏手柄，如果未选中它，检查它。

3.然后打打开设置应用程序右边的设置按钮。

4.单击服务器地址设置IP地址，PC的本地IP地址（例如192.168.1.100）。

5.单击切换输入法，确保APCGamePad被选中。

6.单击连接到服务器！

如果你想看看它是否工作，joy.cpl运行。点击vJoy设备，通常是最高的一个。然后单击属性，您将看到该设备的举动，当你移动手柄。

对于NVIDIA SHIELD便携注意：

对于控制台模式下，可以通过在应用程序关闭控制器1使用第2个控制器控制器＃1。这将移动所有控制器下跌1（即控制器2将成为控制器1，3将成为2等）

选择被映射到音量键。任何其他控制器，选择将选择或背面。

可能需要打开UDP端口4444在路由器上，如果你从本地（家庭）网络访问你的电脑了。

Windows防火墙可能阻止因此增加异常应允许应用程序连接的连接。